What is the possibility that the faucet of the water heater cannot discharge water?
1. It may be due to poor contact of the water level wire, with the plug on the circuit board under the machine and unplugged from the beginning (the overflow water flow is large, which is the problem)
2. It may be that the solenoid valve is stuck by something. After unscrewing the four screws of the solenoid valve, clean the film inside (the small overflow water flow is the problem)
Firstly, the faucet is blocked. There is a filter at the outlet of the faucet, which is the simplest to block. You can unscrew it to take a look. Secondly, the cold water pipe may be blocked by debris, the pipe diameter may be reduced due to welding of the PPR pipe, or it may be due to a water valve not being fully opened.
文章源自：開平開水器龍頭 http://www.doxbqgb.cn/
-
12-06
Manufacturer of water heater: Maintenance methods for water heaters
Maintenance methods for water heatersA water boiler is a type of drinking water equipment that uses electricity or gas to produce boiled water. The machine is easy to operate, has a beautiful appearan
-
11-11
Water heater manufacturer: advantages of stepper electric water heaters
The advantages of stepper electric water heatersMany people are currently quite familiar with electric water heaters, and we can see their traces in many places such as enterprises, factories, schools
-
10-14
Is the "high flux" water purifier really good
Looking at the water purification market in the past two years, high-frequency words are undoubtedly "high flux". Haofan Water Purification Enterprise regards "high flux non tank pure water machine" a
-
02-19
What is the possibility that the faucet of the water heater cannot discharge water?
1. It may be due to poor contact of the water level wire, with the plug on the circuit board under the machine and unplugged from the beginning (the overflow water flow is large, which is the problem)